Getting a Sangoma A101 PRI card working in a trixbox Pro system is actually pretty simple and the Sangoma cards are the only interface cards actually certified by trixbox Pro. If you have the card inside the system during the actual installation, you are pretty much done unless you need to change some of the default settings which you can easily do from the Cards page.
If you installed trixbox Pro without a card in it, there are a couple of ways to tell trixbox Pro to detect the card. If you are at the console, the simplest method is to simply login with the ip/ip login and password and choose the option to Redetect PSTN Cards. This redetection process will find any available cards and configure them for you.
If you don’t have access to the console and need to configure the card entirely from the web interface, then the way to do that is from the Cards page and go through the card detection there. The following video will show you how to do this second type of installation since you need to navigate around the interface a little to find it.
For this demo, we used a Sangoma A101 PRI card and a Rockbochs 1U Appliance.
VoipStore.com: Sangoma Featured Solutions Page
888VoipStore.com: Sangoma Products Page
VoipStore.com: trixbox Featured Solutions Page
888VoipStore.com: trixbox Products Page
